China Standard or Nonstandard Power Transmission Cast Iron Tapered Shaft Lock 2517 Taper Lock Bushings aluminium shaft collar

Product Description

Common or Nonstandard Electrical power Transmission Solid Iron Tapered Shaft Lock 2517 Taper Lock Bushings

Bushing No. Bore
1008 ten.11.12.14.15.16.18.19.twenty.22.24.25
1108 10.eleven.twelve.fourteen.15.sixteen.18.19.twenty.22.24.25.28
1210 1215 11.twelve.14.15.sixteen.18.19.20.22.24.twenty five.28.thirty.32
1310 fourteen.15.16.eighteen.19.20.22.24.twenty five.28.thirty.32.35
1610 1615 fourteen.fifteen.16.18.19.20.22.24.twenty five.28.thirty.32.35.38.forty.forty two
2012 2017 18.19.20.22.24.twenty five.28.thirty.32.35.38.40.forty two.45.forty eight.fifty
2517 2525 twenty.22.24.twenty five.28.thirty.32.35.38.40.42.45.forty eight.fifty.55.60
3571 3030 twenty five.28.thirty.32.35.38.40.42.45.forty eight.fifty.55.sixty.sixty five.70.75
3525 3535 35.38.40.forty two.forty five.forty eight.fifty.55.60.65.70.seventy five.eighty.eighty five.ninety
4030 4040 40.42.45.fifty.60.65.70.seventy five.eighty.85.ninety.ninety five.one hundred
4535 4545 55.sixty.sixty five.70.75.80.85.ninety.95.a hundred.one hundred and five.a hundred and ten
5040 5050 sixty.65.70.seventy five.eighty.85.90.95.100.one hundred and five.a hundred and ten.one hundred fifteen.120.one hundred twenty five

Use:
Largely utilised in the mining, metallurgical, cement, substances,construction, buiding resources,
electric powered electrical power, telecommunictions, textiles, and transportation departments.
Such as:
one. conveyor:Belt conveyor,AFC conveyor, chain conveyor, screw conveyor.
2. Pum:H2o pump, oil pump, slush pump, etc.
three. Enthusiast: Draft fan, fanner, boil admirer, etc.
four. Excator:bucket excavator bucket, wheel excavators .
five. Crane:Tower crane, gantry crande, bridge crane.
six. Other folks:Different elevators, coal plough, ball mill, crusher, recreation device.
7. Blender products, centrifuger, washer, leather-creating machine, equipment for recreation park mixer wire drawing machine.Extruder, dregs crusher of boiler.
eight. Plastic feeder, rubber smelling device, and so forth.
 
Major Goods:
one. Timing Belt Pulley (Synchronous Pulley), Timing Bar, Clamping Plate 
2. Forging, Casting, Stampling Part 
3. V Belt Pulley and Taper Lock Bush Sprocket, Idler and Plate WheelSpur Gear, Bevel Gear, Rack  
4. Shaft Locking Device: could be alternative for Ringfeder, Sati, Chiaravalli, Tollok, etc. 
5. Shaft Coupling:including Miniature couplings, Curved tooth coupling, Chain coupling, HRC coupling, Normex coupling, Type coupling, GE Coupling, torque limiter, Universal Joint  
6. Shaft Collars: including Setscrew Type, Single Split and Double Splits 
7. Equipment & Rack: Spur gear/rack, bevel gear, helical gear/rack
8. Other customized Machining Parts according to drawings (OEM).

 
More Rewards:
one. More competitive prices,
two. Shorter delivery date: 35 days for out of inventory merchandise.
3. We are the professional manufacturer in the field of Power Trans. Components,specially for Timing Pulleys.
four. Produce standard and non-common
five. Strict QC Management:ISO9001:2008,our engineer,Mr.Wang has specialized in the prodcution for over 20 years. 
 
Packaging & Shipping:
All the products can be packed in cartons,or,you can choose the pallet packing.
MADE IN CHINA can be pressed on wooden cases.Land,air,sea transportation are available.UPS,DHL,TNT,
FedEx and EMS are all supported.

 
Organization: 

Factory See:

 
 
FAQ:
one. MOQ
 A: Usually, 1 computer for regular parts contact for nonstandard components.
 
two. Delivery Time
 A: In inventory: inside of 5 operating days. Out of inventory: depends on your order amount.
 
three. How To Select
 A: component quantity or drawing, catalogue. If no, you can send out us your sample, so we can make the drawing and sample accordingly.

four: What is the Warranty for your products?
 A:Generally our guarantee is 1 12 months.
 
 We warmly welcome buddies from domestic and abroad appear to us for enterprise negotiation and cooperation for mutual benefit.To source customers exceptional quality goods with very good price and punctual delivery time is our accountability.
 

Certification: ISO
Pulley Sizes: 1008, 1108, 1210, 1610, 2517, 3020, 3030 etc.
Material: Cast Iron, Steel
Surface Treatment: Black Oxide, Phosphating
Application: Chemical Industry, Grain Transport, Mining Transport, Power Plant, etc.
Size: Metric & Inch

###

Samples:
US$ 1/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Bushing No. Bore
1008 10.11.12.14.15.16.18.19.20.22.24.25
1108 10.11.12.14.15.16.18.19.20.22.24.25.28
1210 1215 11.12.14.15.16.18.19.20.22.24.25.28.30.32
1310 14.15.16.18.19.20.22.24.25.28.30.32.35
1610 1615 14.15.16.18.19.20.22.24.25.28.30.32.35.38.40.42
2012 2017 18.19.20.22.24.25.28.30.32.35.38.40.42.45.48.50
2517 2525 20.22.24.25.28.30.32.35.38.40.42.45.48.50.55.60
3020 3030 25.28.30.32.35.38.40.42.45.48.50.55.60.65.70.75
3525 3535 35.38.40.42.45.48.50.55.60.65.70.75.80.85.90
4030 4040 40.42.45.50.60.65.70.75.80.85.90.95.100
4535 4545 55.60.65.70.75.80.85.90.95.100.105.110
5040 5050 60.65.70.75.80.85.90.95.100.105.110.115.120.125
Certification: ISO
Pulley Sizes: 1008, 1108, 1210, 1610, 2517, 3020, 3030 etc.
Material: Cast Iron, Steel
Surface Treatment: Black Oxide, Phosphating
Application: Chemical Industry, Grain Transport, Mining Transport, Power Plant, etc.
Size: Metric & Inch

###

Samples:
US$ 1/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Bushing No. Bore
1008 10.11.12.14.15.16.18.19.20.22.24.25
1108 10.11.12.14.15.16.18.19.20.22.24.25.28
1210 1215 11.12.14.15.16.18.19.20.22.24.25.28.30.32
1310 14.15.16.18.19.20.22.24.25.28.30.32.35
1610 1615 14.15.16.18.19.20.22.24.25.28.30.32.35.38.40.42
2012 2017 18.19.20.22.24.25.28.30.32.35.38.40.42.45.48.50
2517 2525 20.22.24.25.28.30.32.35.38.40.42.45.48.50.55.60
3020 3030 25.28.30.32.35.38.40.42.45.48.50.55.60.65.70.75
3525 3535 35.38.40.42.45.48.50.55.60.65.70.75.80.85.90
4030 4040 40.42.45.50.60.65.70.75.80.85.90.95.100
4535 4545 55.60.65.70.75.80.85.90.95.100.105.110
5040 5050 60.65.70.75.80.85.90.95.100.105.110.115.120.125

Types of Shaft Collars

Clamp style shaft collars

A variety of styles of shaft collars are available for your machining needs. Clamp style shaft collars offer better flexibility and hold better than set screw collars. They are best for shaft materials that are softer than a setscrew. Clamp style collars are generally easier to maneuver, as they are two-piece and are hinged along the shaft.
Clamp style shaft collars come in two-piece and one-piece designs. One-piece clamp collars are typically used for a single-piece shaft, while two-piece clamp collars are used for multiple shafts. The one-piece clamp collar provides a more uniform holding force, while two-piece clamp collars provide more clamping force and can be installed anywhere on the shaft. Both styles are available in English and metric measurements.
The holding power of Clamp style shaft collars depends on their bore size and concentricity. The fastening hardware also affects torque transmission. Forged screws are generally stronger than broached screws, and are less likely to ream out. However, you still need to make sure that the material of the collar is strong enough to withstand the recommended screw torque.
Clamp style shaft collars are available in 1215 lead-free steel with a black oxide finish and zinc plating, as well as 303 and 316 stainless steel. They are also available in 2024 aluminum with an anodized finish. They are available in a range of sizes from 1/8” to six inches and 3mm to 150mm.
One of the main benefits of Clamp style shaft collars is their versatility. The collars can be used as guides, spacers, or stops on a variety of medical equipment. They are designed to distribute compression forces around a shaft, and they can be added at any stage in the manufacturing process.
Shaft Collar

Set screw shaft collars

Set screw shaft collars are used to secure screws to shafts. They can be purchased in a variety of sizes. The external diameter, internal diameter, and width of the collar will determine the proper collar size. Some companies also offer custom and adjustable-width collars. Clamp-style shaft collars are easier to maintain, and distribute torque evenly across the shaft. They also offer twice the holding power of set screw collars.
Collars are available in metric and inch sizes. They are also available in zinc plated and black-oxide steel. In addition, they come in a variety of styles. Whether you’re looking for a custom collar, or something a little more conventional, you can find it with the help of an ISO-certified supplier.
Set screw shaft collars come in different sizes and materials. Socket collars, for example, are made of steel and have an inside diameter of 5/64″ to 1-1/8″. In addition, forged socket set screw shaft collars come in 3/16 to 4 in. They are also available with special hardware for connection to shafts.
Set screw shaft collars are commonly used on transmission and machinery. A set screw allows you to secure the collar in position by setting it into the correct position with a grub screw or a set screw. The set screw can then be adjusted with a screw driver and is a quick and easy solution for keeping a shaft in place.
Shaft Collar

Aluminum shaft collars

Aluminum shaft collars offer a number of advantages, ranging from their light weight to their corrosion resistance. Aluminum shaft collars are available in various styles and sizes, and can be plated with a variety of finishes. They are also available in lightweight styles for applications with tight space constraints. The most important factor when selecting a shaft collar is the material used to make it. Aluminum is lighter than steel and has a high strength to weight ratio. The choice of material should also depend on how much corrosion resistance is required. For example, if the shaft will be exposed to extreme environments, it is a better choice to use treated steel.
Another benefit to aluminum shaft collars is their ability to be custom-matched to the shaft. This feature helps to increase their aesthetics and branding potential. In addition, the ability to color-code components and switches can improve safety. This is especially useful in fail-safe applications. By incorporating color-coded collars, manufacturers can increase the safety of their products.
Another advantage of aluminum shaft collars is their strength. For instance, they can withstand higher torque levels than other types of shaft collars. They can be easily adjusted, and their two-piece design makes them easy to replace. Moreover, CZPT keeps the two-piece collars together during manufacturing, ensuring a perfect fit for the shaft. These collars also feature forged steel socket screws for enhanced holding power and torque capacity.
Single-piece shaft collars are also available in various styles. The set screw type has a perpendicular outer face. The set screw in these collars is used to engage the mating shaft. This type of shaft collar is a good choice for rotating assemblies.
Shaft Collar

Stainless steel shaft collars

The main function of a stainless steel shaft collar is to provide clamping force to a rotating shaft. This is achieved by a variety of methods. One of these is by bending or hammering. A shaft collar can also be made of aluminum or a combination of both. These options provide different advantages, which are described in this article.
Stainless steel shaft collars are available in different sizes, shapes, and materials. The diameter of the shaft collar may range from five-sixteenths to two-and-a-half inches. Some manufacturers produce the collars in different materials, including T304, T316, 416, and 17-4PH. Their products may also come in various shapes, such as angles, flats, structural shapes, and threaded rods.
One of the most important advantages of a stainless steel shaft collar is its strength and durability. A well-made collar can prevent wear and tear and provide excellent holding power. It also has many applications and is useful in many industries. Its application ranges from vertical conveyors to horizontal athletic equipment machinery, from agriculture to retail.
While there are numerous types of shaft collars, all three types have some common characteristics. Typically, steel shaft collars have high holding power and slim to average profiles. Heavy-duty collars have twice the holding power of low-profile collars and are used in heavy-duty construction and mining. Ultra Heavy-Duty shaft collars have the highest axial holding power and are made of steel. Shaft collars may be treated with zinc for corrosion resistance.
One manufacturer offers stainless steel shaft collars made of 303 stainless steel and other materials. It offers collars of various diameters from three-eighth to one-eighth inch. They are available in threaded, mounting, and heavy-duty styles, and are suitable for a wide range of applications, including the aerospace, energy, and medical industries.
China Standard or Nonstandard Power Transmission Cast Iron Tapered Shaft Lock 2517 Taper Lock Bushings     aluminium shaft collarChina Standard or Nonstandard Power Transmission Cast Iron Tapered Shaft Lock 2517 Taper Lock Bushings     aluminium shaft collar
editor by czh 2023-01-17

shaft clamp

As one of leading shaft clamp manufacturers, suppliers and exporters of mechanical products, We offer shaft clamp and many other products.

Please contact us for details.

Mail:[email protected]

Manufacturer supplier exporter of shaft clamp

Recent Posts