China Ringblok Standard Keyless Shaft Locking Device 1060, 1100, 1120, 1710, 1720, 1800, 7006, 7005, Rfn7012, Rfn7014 shaft collar application

Solution Description

CZPT Keyless Locking Assembly KLD-2
Medium torque, self-centering, small cross segment, machining tolerance shaft H8, hub H8 Socket head locking screw DIN912-twelve.9
Self-centering with superb concentricity the small outer diameter is place-preserving and suited for small wheel diameters the spacer ring among the outer flange and the hub maintains the fitting placement in the axial path to permit precise positioning with no a shaft collar the thrust-off threads in the outer flanges are used for dismantling.
 
KLD-2 Interchange with Z11,BIKON 8000,BEA BK80,BONFIX CCE1000,Obstacle 02,Chiaravalli RCK80,CONEX  B,7110 ECOLOC, Fenlock FLK110,GERWAH PSV2571.1,ITALBLOCK CN55,KTR250,KINLOK LOK10,KBS80,MAV 5061,POGGI CAL-B,RFN7110,Ringspann RLK110,Ringblok 1100,SIT 3,SATI KLCC,TOLLOK TLK110,Tsubaki TF,V-Blok VB800B,Walther Flender MLC3000,Fenner Drive B-Loc B800,LoveJoy SLD1900,SKF FX20,OKBS80,DRIVELOCK80
 
Ubet Locking Aspects KLD-3
Minimal torque, Medium area pressure, Taper rings only, Low axial and radial dimensions
This clamping established is self-centering with outstanding concentricity. The incredibly little outer diameter is area-preserving and ideal for little wheel diameters. The spacer ring in between the outer flange and the hub maintains the fitting situation in the axial course to enable actual positioning with no a shaft collar. The thrust-off threads in the outer flanges are used for dismantling.
 
KLD-3 Interchange with Z1,BIKON 5000,BEA BK50,BONFIX CCE3000,Challenge 03 Chiaravalli RCK50,CONEX  C,Fenlock FLK300,ITALBLOCK CN31,KRT150,KINLOK LOK80,KBS50,KANA three hundred,MAV 3003,POGGI CAL-C,RFN8006,Ringspann RLK300,Ringblok 1060,SIT 2,SATI KLNN,TOLLOK TLK300,Tsubaki EL, ,Walther Flender MLC 2000,Fenner Drive B-Loc B112,LoveJoy SLD350,SKF FX30,OKBS50,DRIVELOCK50
 
Ubet Mechanical Locking Gadget KLD-4
High torque, self-centering, medium surface area stress, machining tolerance shaft H8, hub H8 socket head Locking screw DIN912-12.9
 
KLD-4 Interchange with Z3,BIKON 7000A,BEA BK70,BONFIX CCE4000,Problem 04,Chiaravalli RCK70,CONEX  D,7004 ECOLOC, Fenlock FLK130,GERWAH PSV2007,ITALBLOCK CN54/N,KTR200,KINLOK LOK20A,KBS70,MAV 6901,POGGI CAL-D,RFN7013.,Ringspann RLK130,Ringblok 1300.1,SIT 5A,SATI KLDA,TOLLOK TLK130,V-Blok VK700,SKF FX40,OKBS70,DRIVELOCK70
 
Ubet Shaft Hub Relationship KLD-five
Medium torque, lowered duration, medium self-centering, Substantial surface strain, machining tolerance shaft H8, hub H8 socket head Locking screw DIN912-twelve.nine
Appropriate for slender, disk-shaped wheel hubs. Self-centering and self-locking in the clamping condition.
 
KLD-5 Interchange with Z3B,BIKON 1003,BEA BK13,BONFIX CCE4100,Obstacle 05,Chiaravalli RCK13,CONEX  DS,7003 ECOLOC, Fenlock FLK132,GERWAH PSV2006,KTR203,KBS13,KANA 201,MAV 1062,POGGI CAL-DS,RFN7013., Ringspann RLK132,Ringblok 1710,SIT 6,SATI KLAA,TOLLOK TLK132,TAS3003,       V-Blok VK160,Walther Flender MLC 5006,LoveJoy SLD1750,SKF FX41, OKBS13, DRIVELOCK13.
 
Ubet Shaft Locking Gadget KLD-6
Medium torque, self-centering, Lower floor force, No axial hub movement, machining tolerance shaft H8, hub H8 socket head Locking screw DIN912-12.nine
 
KLD-6 Interchange with Z13,BIKON 7000B,BEA BK71,BONFIX CCE4500,Problem 06,Chiaravalli RCK71,CONEX  E,7007 ECOLOC, Fenlock FLK131,GERWAH PSV2007.3,ITALBLOCK CN54/S,KTR201,KINLOK LOK20B,KBS71,MAV 6902,POGGI CAL-E,RFN7013.1,Ringspann RLK131,Ringblok 1300.2,SIT 5B,SATI KLDB,TOLLOK TLK131,Tsubaki KE,V-Blok VK700.1,Walther Flender MLC5000B,SKF FX50,OKBS71,DRIVELOCK71
 
Ubet Clamping Power Lock KLD-7
Medium torque, diminished length, Large floor strain, No axial hub motion, machining tolerance shaft H8, hub H8 socket head Locking screw DIN912-12.9 Simultaneous Relationship of Chain Sprocket
 
KLD-7 Interchange with Z8,BIKON 1006,BEA BK16,BONFIX CCE4600,Challenge 07,Chiaravalli RCK16,CONEX  ES,7006 ECOLOC,Fenlock FLK133,GERWAH PSV2006.3,ITALBLOCK CN9/4,KTR206,KBS16,KANA 201,MAV 1061,POGGI CAL-ES,RFN7013.1,Ringspann RLK133,Ringblok 1720,SATI KLAB,TOLLOK TLK133,Tsubaki AE,TAS3006,V-Blok VK130,Walther Flender MLC 5007,LoveJoy SLD1750,SKF FX51,OKBS16,DRIVELOCK16
 
Ubet Shrink Disc KLD-fourteen
Substantial torque, No axial hub motion, Higher velocity application, chosen solution for coupling hub and hollow shaft gearbox, DIN931-10.9 screw Smart-Lock Shrink Disc, Narrow Hub Link for sprockets, join hollow and strong shafts frictionally and backlash-free.
 
KLD-fourteen Interchange with Z7B,BEA BK19,BONFIX CCE8000,Obstacle fourteen,Chiaravalli RCK19,CONEX  SD, Fenlock FLK603, ,KTR603,KBS19,MAV 2008,RFN4071,Ringspann RLK603,Ringblok 2200,SATI KLDD,TOLLOK TLK603, Tsubaki SL, ,Walther Flender MLC 9050,Fenner Travel B-Loc SD10,LoveJoy SLD900,SKF FX190,OKBS19,DRIVELOCK19
 
Ubet Locking Assembly KLD-fifteen
Large torque, self-centering, Lower-medium surface strain, machining tolerance shaft H8, hub H8 socket head Locking screw DIN912-12.nine
 
KLD-15 Interchange with BEA BK15, Problem fifteen,Chiaravalli RCK15,CONEX  EP, Fenlock FLK134,KBS15 ,MAV 3061,Ringspann RLK134,SATI KLBB,TOLLOK TLK134, ,SKF FX52,DRIVELOCK15
 
 
Ubet Locking Bushes KLD-sixteen
Medium torque, Decreased length, Medium self-centering, High surface area stress, machining tolerance shaft H8, hub H8 socket head Locking screw DIN912-twelve.nine
 
KLD-sixteen Interchange with BONFIX CCE4900,Obstacle 16,CONEX  L,KTR225,KBS52,SATI KLHH,,SKF FX120
 
 
Ubet Ball Bearing Adapter Sleeve KLD-seventeen
Low torque, Quick Length, Not self-centering, Lower area stress, machining tolerance shaft H8, hub H8
 
KLD-seventeen Interchange with BEA BK25, Challenge 17, KBS51, SATI KLFC,,SKF FX80
 
Ubet Bearing Adapter Sleeve  KLD-seventeen.1
Lower-medium torque, self-centering, minimal floor strain, machining tolerance shaft H8, hub H8
 
KLD-seventeen.1 Interchange with Z19B, BEA BK26,Obstacle 21,Chiaravalli RCK55, Fenlock FLK250,KTR125,KBS55, POGGI CAL-L,Ringspann RLK250,Ringblok 1500, SATI KLFF,TOLLOK TLK250
 
Ubet Shaft Clamping Collar KLD-18
Lower-medium torque, Brief Length, self-centering, low surface area force, machining tolerance shaft H8, hub H8, socket head Locking screw DIN912-12.9
This clamping established is self-centering and appropriate for really little shaft diameters.     It transfers regular to huge torques
 
KLD-17.1 Interchange with BEA BK61,Chiaravalli RCK61,7002 ECOLOC ,GERWAH PSV2061,KTR105,KBS61,MAV 7903,SATI KLSS, Walther Flender MLC 5050,SKF FX350,OKBS61,DRIVELOCK61
 
Ubet Clamping Gadget KLD-19
quite higher torque, self-centering, medium area stress, no axial hub movement, machining tolerance shaft H8, hub H8,  socket head Locking screw DIN912-12.nine
This clamping established is self-centering with exceptional concentricity. The incredibly tiny outer diameter is space-saving and appropriate for modest wheel diameters. The spacer ring between the outer flange and the hub maintains the fitting placement in the axial route to empower specific positioning without having a shaft collar.
 
KLD-19 Interchange with Z12A,BIKON 1012,BEA BK11,BONFIX CCE9500,Obstacle 19,Chiaravalli RCK11,CONEX  F,7005 ECOLOC,Fenlock FLK400,GERWAH PSV2005,ITALBLOCK CN911,KTR400,KINLOK LOK40,KBS11,MAV 4061,POGGI CAL-F,RFN7015,Ringspann RLK400,Ringblok 1800,SIT 4,SATI KLEE,TOLLOK TLK400,Tsubaki Advert,TAS3012,V-Blok VK112,Walther Flender MLC 4000/MLC 7000,Fenner Travel B-Loc B112,LoveJoy SLD2600,SKF FX60,OKBS11,DRIVELOCK11
 
Ubet Clamping Gadget  KLD-33 interchange with Z4, RFN7014
 
Ubet Locking Unit KLD-34 interchange with  Z5,BIKON 1015./1015.1, 7009 ECOLOC,Fenlock ,GERWAH PSV2009, KTR401,MAV 1008,RFN7015.,Ringspann RLK401,Ringblok 1810,TOLLOK TLK451,TAS3015./3015.1,

Keyless Locking Products are also get in touch with as below 
1.     Welle-Nabe-Verbindungen
2.     Wellenspannsaetze,
3.     Spannsaetze, 
4.     Taper Spannbuchsen,
5.     Taper Lock, 
six.     Keyless Locking System,
7.     Keyless Locking  Assembly,
eight.     Keyless Shaft Locking Device,
9.     Keyless Shaft Hub Locking Device,
ten.  Keyless Bushings,
11.  Keyless Shaft Hub Connection,
12.  Clamping Sleeve,
13.  Clamping Component,
fourteen.  Clamping Collar,
15.  Clamping Bush,
16.  Clamping Gadgets,
17.  Clamping Set,
18.  Clamping Power Lock,
19.  Cone Clamping Aspect,
twenty.  Shaft Clamping,
21.  Shaft Repairing,
22.  Shaft Fixing Cone Clamping Element, 
23.  Conical clamping rings, 
24.  Shaft Lock Clamping Element,
twenty five.  Shaft Clamping Factor,
26.  Shaft Clamping Collar,
27.  Shaft Locking Gadget,
28.  Shaft Hub Relationship,
29.  Shaft Hub Locking Device,
thirty.  Shaft Hub Locking Assembly,
31.  Shaft Lock,
32.  Silted Clamping Aspect,
33.  Shaftlock Clamping Component,
34.  Locking Assembly,
35.  Locking Bushes,
36.  Locking Rings,
37.  Rigid Shaft Coupling,
38.  Rigid Shaft Coupler,
39.  Rigid Ring Block,
forty.  Ring Shaft Lock, 
41.  Ringblock Locking Assemblies,
forty two.  Gear Wheel Connection,
43.  Zinc Plated Locking Products, 
44.  Nickel Plated Locking Assembly,
forty five.  Mechanical Locking Gadget, 
forty six.  Mechanical shaft lock,
forty seven.  Schrumpfscheibe,
forty eight.   Exterior Locking Assembly,
49.  Narrow Hub Connection for Sprockets,
50.  Shrink Disc, 
51.  Brake Disc, 
52.  Shrink Disk,
fifty three.  External Locking Assembly Mild Responsibility, 
fifty four.  Shrink Discs Normal Duty, 
fifty five.  Shrink Disks Weighty Responsibility, 
fifty six.  Smart-Lock Schrumpfscheibe, 
fifty seven.  Smart-Lock Shrink Disc, 
58.  Bearing Adapter Sleeve, 
fifty nine.  Lock Nut,
60.  POWER NUT, 
sixty one.  POWER Website link, 
62.  Shaft Self-Lock Ring Nut, 
63.  Nickel Plated Locking Products,  
64.  Zinc Plated Locking products, 
65.  Stainless Metal Locking Devices.

Ubet Equipment is also competetive on these energy transmission components.

Clamp electrical power lock, Energy Lock, Locking Assembly, Locking unit is a keyless shaft-hub locking units for connecting hubs and shaft with substantial torque transmission, are linker utilized among shafts and pulley, which can replace the solitary crucial and spline.
They can transmit torque via a set of tightening screw with substantial strength, which can make the needed clamping power in between the interior rings and shaft, also in between the outer ring and hub. It’s effortless assmebling and diassembling.
They have a very good interchangeablity. The screw are with large power.
Energy lock have numerous merchandise
We generate by CNC device
Their principal content is superior metal.
Following machining, they will have easy and beautiful floor, have lengthy lifestyle time and higher strength.

1. Worldwide normal Electricity Lock
two. Most well-liked on European market
3. Metal 42CrMo4 / 4140 C45E / 1045
We are a foremost producer of Electrical power Lock in China. A lot more than sixty five% of our products are exported to West Europe and twenty% to North The united states. We promise superb quality solution with competitive price in China.
Our Energy Lock are interchangeable to:
Ringfeder, Tollok, Chiaravalli, Sati, Obstacle, Bonfix, Compomac, V-Blok, Ringblok, Kana, KTR
GB STHangZhouRD: Z1, Z2, Z3, Z3 Lengthier, Z4, Z5, Z6, Z7B, Z8, Z11, Z12A, Z13, Z14, Z19A, Z19B
RINGFEDER GERMANY STHangZhouRD: RFN4071, RFN7012, RFN7013, RFN7110, RFN8006
TSUBAKI JAPAN STHangZhouRD: AS, TF, EL, SL, Ad
CHIARAVALLI ITALY STHangZhouRD: RCK11, RCK13, RCK15, RCK16, RCK19, RCK40, RCK45, RCK50, RCK55, RCK70, RCK71, RCK80, RCK95
TOLLOK ITALY STHangZhouRD: TLK110, TLK130, TLK131, TLK132, TLK133, TLK134, TLK200, TLK300, TLK400, TLK603
RINGSPANN GERMANY STHangZhouRD: RLK130, RLK132, RLK133, RLK200
BIKON GERMANY STHangZhouRD: 1003, 1006, 1012, 4000, 5000, 7000A, 7000B, 8000
BONFIX STHangZhouRD: CCE1000, CCE2000, CCE3000, CCE4000, CCE4100, CCE4500, CCE4600, CCE4900, CCE8000, CCE9500
SATI STHangZhouRD: KLGG, KLCC, KLNN, KLDA, KLAA, KLDB, KLAB, KLPP, KLBB, KLHH, KLEE, KLFF, KLMM
COMPOMAC STHangZhouRD: A, B, C, D, ES/DS, EP, SD, F
VBLOK STHangZhouRD: VK400, VK800B, VK700, VK160, VK700.1, VK130, VK112
RINGBLOK STHangZhouRD: 1060, 1100, 1120, 1710, 1720, 1800
KANA STHangZhouRD: 200, 201, 300
KTR STHangZhouRD: KTR100, KTR150, KTR200, KTR201, KTR203, KTR206, KTR225, KTR250, KTR400, KTR603
Feature
1. Simple to put in and dismantle.
2. High diploma of adaptability
three. Prolonged lifetime and high successful transmitting
4. Minimal notching effect
five. Security of the pricey tools underneath over load working.
six. In compliance with quality requirement of designed coutries.
7. Tremendous high good quality with most affordable price tag.
Clamp electrical power lock, keyless locking system, locking gadget, shaft locking assemblies, keyless shaft locking system, keyless shaft-hub locking device, lock unit

 

US $1
/ Piece
|
10,000 Pieces

(Min. Order)

###

Feature: Flame-Retardant, Anti-Static, Oil-Resistant, Cold-Resistant, Corrosion-Resistant, Heat-Resistant, Alkali-Resistant, Skid-Resistance, Wear-Resistant, Acid-Resistant, High Temperature-Resistance
Application: Textile Machinery, Garment Machinery, Conveyer Equipment, Packaging Machinery, Electric Cars, Motorcycle, Food Machinery, Marine, Mining Equipment
Surface Treatment: Oxygenation
Material: Carbon Steel
Transport Package: Cartons + Plywood Boxes
Specification: 1.5-20KG

###

Samples:
US$ 0/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:
US $1
/ Piece
|
10,000 Pieces

(Min. Order)

###

Feature: Flame-Retardant, Anti-Static, Oil-Resistant, Cold-Resistant, Corrosion-Resistant, Heat-Resistant, Alkali-Resistant, Skid-Resistance, Wear-Resistant, Acid-Resistant, High Temperature-Resistance
Application: Textile Machinery, Garment Machinery, Conveyer Equipment, Packaging Machinery, Electric Cars, Motorcycle, Food Machinery, Marine, Mining Equipment
Surface Treatment: Oxygenation
Material: Carbon Steel
Transport Package: Cartons + Plywood Boxes
Specification: 1.5-20KG

###

Samples:
US$ 0/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

Common Uses for the Shaft Collar

The shaft collar is a relatively simple machine component, but one of the most important in many power transmission applications. It is most often used in gearboxes and motors, where it serves as a locating component, bearing face, and mechanical stop. Its simple design allows for easy installation and makes it ideal for a range of applications. Listed below are some of the most common uses for the shaft collar. Learn more about this important machine component.

Single split

Two-piece shaft collars are an excellent option for applications where a single piece collar is not practical. They provide the same benefits as one-piece collars, but with more convenience when installing. The two-piece collar has a clamp style, which allows the collar to be adjusted with a hand tool. They are suitable for light-duty applications and come in a variety of diameters. In addition to shaft diameters, collars are available with different threaded bore sizes. Shaft diameters are usually measured in mm. They can be easily installed and disassembled by removing the cap screws from each side.
Single split shaft collars come with a machine screw that tightens the clamp around the shaft. This ensures a tight, secure fit and better holding power than solid collars. They are easy to install, remove, and adjust, and work on virtually all types of shafts. The machine screw helps to prevent the collar from ripping the shaft.
Shaft collars come in a variety of materials. Typical materials include stainless steel, alloyed steel, and nylon. They are also available in custom sizes. If you want a specific size, be sure to specify that when ordering. These collars are made of quality materials, and they will hold up to the most rigorous applications.
Heavy duty shaft collars are manufactured from higher-grade materials than standard collars. They have a larger outer diameter, wider flange, and a larger screw for increased holding power. These collars are typically used in short-term, rigid coupling applications, and they are available in one-piece and two-piece clamp styles. These collars are typically made from 1215 lead-free steel or 303 stainless steel. Some of them can be finished with an anodized finish.
Mountable shaft collars are used to mount sensors, fixtures, and other assemblies. There are three different styles of mountable shaft collars: flange collars, flat collars, and quick-release collars. The material used for shaft collars can be 1215 lead-free steel with a black oxide finish, high-strength aluminum, and 303 stainless steel.
Shaft Collar

Solid

A solid shaft collar is a shaft coupling that is used to connect two shafts. They can be made of a variety of materials, including steel, zinc plated, and stainless steel. In addition, they come with various finishing options, including a zinc plated or black oxide finish. In addition, they can be made to fit a variety of shaft sizes and types.
Shaft collars are a simple, yet essential part of machine design. They can be found in virtually any piece of machinery. They can serve a variety of functions, including holding bearings on shafts, positioning components within motor assemblies, and acting as mechanical stops. While they can serve a variety of functions, they are most commonly used as bearing faces, mechanical stops, and locating components. They are also easy to install and tighten, making them a popular choice for a variety of different applications.
Solid shaft collars are available in two types: one-piece and two-piece. The two-piece collars are generally more rigid, offering better clamping force. However, they require more seating torque than the one-piece clamp collar. This is because there are more screws to tighten the two-piece collar than the single-piece collar.
One type of solid shaft collar is the set screw collar. Its holding power comes from the set screw, which is tightened onto the shaft. Ideally, the set screw should impinge on the shaft, and bite into it. The screw should be made of a softer material, as a harder material would reduce its holding power. However, the set screw collar can be adjusted by milling small flats into the shaft at the locations of the set screw.
A solid shaft collar is a simple machine component used in various power transmission applications. The most common places where it is used include motors, gearboxes, and bearings. Their simple design makes it easy to install and maintain. Unlike early versions, however, which were primarily made of square-headed set screws, modern shaft collars feature recessed set screws.
Shaft Collar

lamping-style

A Clamping-style shaft collar is an essential component of a gearbox or motor. Its high holding power allows it to hold components securely in place and ensure proper power transmission. These collars are also commonly used as spacers or to limit the movement of shafts during reciprocating motion.
These collars come in a variety of styles, including the double-split and semi-split varieties. They are ideal for repetitive positioning and are available in steel and stainless steel. They also feature a quick release element. And the index lever makes them easy to adjust or repair.
There are several different styles of shaft collars, including the Clamping-style shaft collar. The Clamping-style collar is one of the most commonly used in industrial settings. Its clamp is attached to the shaft by screws and has a hinge on one side. This feature eliminates the risk of the screws becoming dislodged while operating the machine.
Clamping-style shaft collars are generally made of steel or stainless steel. They can be made of aluminium, but this material has lower holding power. Stainless steel collars are a good choice for cleanroom environments because they do not outgas. They also require less maintenance. If you’re uncertain which style to choose, consult with a specialist in your field.
Clamping-style shaft collars are commonly used on industrial machinery and are an important part of gearbox maintenance. If you’re planning to install one, make sure you measure it carefully before you install it. If you don’t, you may damage the shaft or endcap. And while you’re at it, be sure to check for any kinks before you use it.
Shaft Collar

Set screw

Set screw shaft collars are the most cost-effective type of shaft collar. Available in bore sizes ranging from 3/16″ to 4″, they offer increased holding power and torque capacity. Additionally, they come with a keyway in case the shafts are keyed. Commercially produced shaft collars are non-magnetic and made of 303 stainless steel. They also come with one set screw per collar.
Shaft collars can be made of aluminum, steel, or a combination of steel. They serve multiple purposes including mechanical stops and stroke limiters, and can be adjusted for the correct fit. They are easy to install and remove, and they provide high clamping power. Custom designs are also available. They can be made of different materials to suit your specific needs.
Set screw for shaft collars are commonly used in transmission and machinery applications. Set screw shaft collars can be adjusted using a screw driver. When tightened, the set screw bites into the shaft material and holds it in place. When used properly, they can reduce the amount of torque required to hold components in place.
Shaft collars come in a variety of sizes. In general, shaft collars can range from 5/64″ to one inch in diameter. In addition, you can choose between metric and inch-sized shaft collars. When choosing a shaft collar, it is important to consider the size and bore diameter of the shaft.
China Ringblok Standard Keyless Shaft Locking Device 1060, 1100, 1120, 1710, 1720, 1800, 7006, 7005, Rfn7012, Rfn7014     shaft collar applicationChina Ringblok Standard Keyless Shaft Locking Device 1060, 1100, 1120, 1710, 1720, 1800, 7006, 7005, Rfn7012, Rfn7014     shaft collar application
editor by czh 2023-01-16

shaft clamp

As one of leading shaft clamp manufacturers, suppliers and exporters of mechanical products, We offer shaft clamp and many other products.

Please contact us for details.

Mail:[email protected]

Manufacturer supplier exporter of shaft clamp

Recent Posts