Product Description
Long Service Life High Chrome Slurry Pump Impeller
ShiJiazhuang NaiPu Pump Pump Co.,Ltd , Is 1 of professional factory of Slurry pump , Sand CZPT Pump , Dredging Pump and Spare parts , with more than 30 years experience.
We also can produce Wear Parts According to the drawing or sample.
Not only does NaiPu offer the complete pumps, we also offer the spares for all series pumps, they include
-Impeller
-Metal Liner
-Rubber Liner
-Bearing Assembly
-Base
-Cover Plate & Frame Plate
-Others
The Pumps are widely used in in metallurgy, mining, Nonmetallic Mining, Coal, Energy
resources, Sand mining, Dredging, Environmental protection, Petrochemical engineering, Flue gas desulfurization and other industrial departments.
ASTM A532 High Chrome Cast Iron Slurry Pump Part Impeller
Main Slurry Pump Parts
Slurry Pump Spare parts Code
| Part Name | Slurry Pump Basic Part No. | Material Code |
| Impeller | 147 | A05,A07,A49, R26,R08,R55,R33…. |
| Adjusting Screw | 001 | E62 |
| Base | 003 | G01 |
| Bearing Housing | 004 | G01 |
| Bearing Assembly | 005 | |
| Bearing | 009 | |
| Clamp Washer | 011 | E62 |
| Cover Plate | 013 | D20 |
| Cover Plate Bolt | 015 | E62 |
| Cover Plate Liner | 017 | R26A R08, R55, R33 ,S21, S42,S31… |
| Cover Plate Liner | 018 | R26A R08, R55, R33 ,S21, S42,S31… |
| End Cover | 571 | E62 |
| Expeller | 571 | G01,A05, C23 |
| Expeller Ring | 571 | G01,A05, C23 |
| Expeller Ring (Rubber) | 571R | R08, R26,R55,R33 |
| Frame Plate | 032 | D20 |
| Frame Plate Bolt | 034 | E62 |
| Frame Plate Liner | 036 | R26A R08, R55, R33 ,S21, S42,S31… |
| Frame Plate Stud | 039 | E63 |
| Frame Plate Liner Insert | 041 | A05,A07, A49, R26,R08,R55,R33….. |
| Gland Assembly | 044 | G01, K24,C23 |
| Intake Joint | 060 | Rubber |
| Labyrinth | 062 | G01 |
| Lantern Ring | 063 | 1Cr18Ni9Ti |
| Impeller O Ring | 064 | Rubber |
| Neck Ring | 067 | E62 |
| Shaft Key | 070 | E05 |
| Shaft | 073 | E05 |
| Shaft Sleeve | 075 | D20 |
| Shaft Sleeve(Long) | 076 | D20 |
| Stuffing Box | 078 | G01, A05 |
| Keeper Plate | 081 | E02 |
| Throat Bush | 083 | A05,R26A |
| Cotter | 085 | E02 |
| Lip Seal | 090 | S10 |
| Shaft O Ring | 109 | Rubber |
| Volute Liner | 110 | A05,A07,A49 |
| Packing | 111 | Q05 |
| Shaft Spacer | 117 | E62 |
| Lantern Restrictor | 118 | 1Cr18Ni9Ti |
| Expeller Ring/ Stuffing Box Seal | 122 | Rubber |
| Volute liner Seal | 124 | Rubber |
| Volute Frame Seal | 125 | Rubber |
| Discharge Joint Ring | 132 | Rubber |
| Grease Cup Adaptor | 138 | E62 |
| Impeller O Ring | 217 | Rubber |
| Impeller Release Collar | 239 | C23 |
Main Slurry Pump Parts : Impeller , Volute Liner , Casing , ThroatBush, Frame Plate Liner Insert , Cover Plate , Frame Plate, Pump Liner Expeller , Expeller Ring ,Stuffing Box , Expeller , Pump Shaft , shaft sleeve, Shaft Spacer, Bearing Assembly , Base, Stuffing Box, Gland Assembly, Bearing Housing , Lantern Ring , pump discharge pipe , flange , and so on.
We also can undertake OEM (Original Equipment Manufacture ) Service.
Metal Slurry Pump Parts
Rubber Slurry Pump Parts
Main Pump Model :
Main Slurry Pump Model
| AH series | L(R) ,M | HH | SP(R) | G | AF Series |
| 1.5/1B-NAH(R) | 20A-L | 1.5/1 C-HH | 40PV-SP(R) | 6/4D-G | 2QV-AF |
| 2/1.5B-NAH(R) | 50B-L(R) | 3/2D-HH | 65QV-SP(R) | 8/6E-G | 3QV-AF |
| 3/2C-NAH(R) | 75C-L | 4/3E-HH | 100RV-SP(R) | 10/8F-G | 6SV-AF |
| 4/3C-NAH(R) | 100 D-L | 4/3X-HH | 150SV-SP(R) | 10/8S-G | 8SV-AF |
| 6/4D-NAH(R) | 150E-L | 6/4F-HH | 200SV-SP | 12/10G-G | 2AHF |
| 6/4E-NAH(R) | 300S-L | 6/4X-HH | 250TV-SP | 14/12G-G | 3AHF |
| 8/6E-NAH(R) | 10/8 R-M | 6S-H | 14/12T-G | 4AHF | |
| 8/6R-NAH(R) | 10/8 E-M | 8/6S-H | 16/14 G-G | 6AHF | |
| 10/8F-NAH(R) | 12/10F-M | 8/6X-H | 16/14TU-GH | ||
| 10/8X-NAH(R) | 6S-HP | 16/14H-GH | |||
| 12/10ST-NAH(R) | 8/6S-HP | 18/16G-G |
OEM Service
Naipu Pump is able to process whatever pump parts and wear parts customers require. The increasing development technology
of reverse engineering has further enabled the company to contra-derive the shape of a sample offered by clients and, with the help
of the latest 3D imaging technology to scan the pump parts, CZPT Pump can acquire accurate drawings (based on aluminum,
iron and wood model patterns) to ensure that the company’s replacement parts fit 100% CZPT customers’ pumps.
Naipu Pump understands the process and demands of the mining industry and can offer comprehensive
services tailored to customers’ needs.
The material can be high chrome alloy Cr27% , Stainless steel, Alloy , Hastelloy and etc.
Naipu WorkShop
HangZhou NaiPu Pump Co.,Ltd have own Foundry workshop, Machining Workshop, Assembly workshop, and advanced test equipment.
We always supply the best price and best quality.
Advanced Test Equipment
Each pump and spare parts will be strictly inspected before delivery.
Customer Visiting
Welcome to contact us
ShiJiaZhuang NaiPu Pump Co.,Ltd
Contact person :Kitty Liu
Welcome to contact me for slurry pump catalogue and price list .
| Max.Head: | 0-118m |
|---|---|
| Max.Capacity: | 0-5400m3/H |
| Driving Type: | Motor |
| Impeller Number: | Single-Stage Pump |
| Working Pressure: | Middle Pressure Pump |
| Influent Type of Impeller: | Single Suction Pump |
| Samples: |
US$ 200/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
Types of Shaft Collars
A shaft collar is a simple machine component that is an integral part of many power transmission applications. It is most commonly found in motors and gearboxes and serves as a mechanical stop, locating component, and bearing face. Its easy installation and quick assembly make it an ideal component for a variety of applications.
Clamp-style shaft collars
Clamp-style shaft collars are fasteners that fit over shafts. They can be made of aluminum, steel, or titanium. Stainless steel collars are available in corrosion-resistant finishes to prevent galling. Engineered plastics are also available. Black oxide finishes improve corrosion resistance and provide a smooth surface for screw installation.
The holding power of Clamp-style shaft collars depends on the shaft’s bore size and concentricity, which are important factors in many applications. The fastening hardware is also important, as it can affect torque transmission. For example, forged screws are superior to broached screws in a number of ways, including reduced risk of reaming out. In addition, the material of the collar must be strong enough to withstand the torque required by the screw.
Shaft collars are complicated components. Their performance can determine the efficiency of an application. The design process is complex, and many factors are considered. Considerations include shaft geometry, bore size, and style. Shaft collar manufacturers will provide performance information on their website. If you are not satisfied with the information provided, you can contact the manufacturer.
Clamp-style shaft collars are made from high-quality materials. The metal used to produce them is lead-free and stainless, which resist corrosion. Moreover, these shaft collars have a high holding power, so they won’t mar your shaft and ensure proper alignment. These collars can be found in a variety of bore sizes, from 1/8″ to six inches.
Clamp-style shaft collars are available in lead-free steel, 303 and 316 stainless steel, and aluminum. They are available in a one-piece clamp or a two-piece clamp style. They are made of high-grade steel and are machined to a burr-free surface.
Clamp-style shaft collars have two-piece clamps that can be easily disassembled and installed in their proper position. Two-piece clamps are stronger than one-piece collars because all of the clamping force goes directly into the clamping shaft. Two-screw clamps have two and four-screws, and can also be wrench-tightened.
Set screw collars were one of the first shaft collars to be mass-produced. They were often used on line shafting in early manufacturing mills. While they can work well for simple shaft positioning, they’re not the most reliable option for complicated applications. Furthermore, set screws can cause damage to the shaft, making it difficult to reposition the collar or adjust its angle. For this reason, small flats are usually added to the shaft at set screw locations.
Set-screw shaft collars
Set-screw shaft collars are used to secure a shaft to a screw. They are available in several sizes and materials. Typical types include the solid, quick-release, split, and threaded styles. They come in an assortment of sizes and materials, including aluminum, zinc plated steel, and black oxide steel. Most are available in stock and are available in various sizes.
These collars come in many sizes and are ideal for use with standard round shafts. They are easy to install and disassemble and feature a high clamping power. They are also available in custom designs and materials. Set-screw shaft collars are available for use in various industries.
The company manufactures a variety of collars, including steel, zinc plated steel, and stainless steel. They also offer custom and adjustable collars. These collars are used in a variety of industries, including the food, chemical, pulp and paper, and wood industries. They are available with a variety of screw threads.
The screw and shaft material relationship must be compatible to ensure a secure fit. In addition, the shaft material should be softer than the screw material. For this reason, set-screw shaft collars are most effective when the shaft is made from softer material. Some setscrew shaft collars feature forged socket set screws to increase their holding power and torque capacity. Additionally, forged stainless steel set screws also increase their performance and hardness.
Shaft collars can be used on machines and transmission applications. They can be adjusted with a set screw or grub screw. In addition to setting the collar into place, a screw driver can also be used to adjust the grip on the collar. This type of shaft collar is often used in manufacturing applications.
Clamp-type collars are another type of shaft collars. These types allow the shaft to rotate and are used for mounting sensors and fixtures. These collars can be found in one-piece or two-piece styles. They can also be used in harsh environments.
Single split shaft collars
Single split shaft collars are used in many applications to protect the shaft from wear and tear. They are easy to install and disassemble, reducing downtime and labor costs. These collars utilize full seating torque of the set screws to apply equal force distribution around the shaft’s circumference, providing stronger holding power.
These shaft collars are available in a variety of materials. They are typically made from different types of steel, including stainless, alloyed steel, nylon, and aluminum. Some are even available in custom sizes. In addition to standard sizes, single split shaft collars also come in a variety of finishes, including black oxide and chrome.
Single split shaft collars come in metric and imperial sizes. They can be made of various materials, including zinc and lead-free steel. These collars are available with a black oxide finish for extra corrosion resistance. They are also available in 303 and 316 stainless steel. They can also be made from engineered plastics.
Single split shaft collars are the most popular style of shaft collars. They are easy to install and disassemble. They provide a tight fit and superior holding power over solid shaft collars. They are also easier to replace and can be used on a variety of shafts. In addition, single split shaft collars are easy to remove and adjust.
Single split shaft collars are available in a variety of bore sizes. They can fit shaft diameters from 1/8″ to four fifteen/16″. Ideally, the material used should be softer than the set screw. You can also choose between non-plated and chrome-plated collars. These collars are available in metric or imperial measurements.
Single split shaft collars are one-piece or two-piece designs. Single-piece shaft collars feature one screw and two-piece collars have two. They are easier to install than single-piece shaft collars and are suitable for lighter duty applications. Single split shaft collars are available in a variety of threaded bore sizes.
Single split shaft collars have a wide range of uses in industrial settings. They can secure bearings on shafts or locate components in motor assemblies. They can also function as mechanical stops. RS PRO offers a wide selection of shaft collars that meet and exceed industry standards.
editor by CX 2023-11-14