We – EPG Team the biggest agricultural gearbox and pto manufacturing unit in China with 5 diverse branches. For much more information: Cellular/whatsapp/telegram/Kakao us at: 0086-13083988828
pto shaft extension tractor offer Adhering pto shaft shapes to new holland br7060 pto shaft “Survival pto shaft clutch by pto shaft yoke alignment Good quality, weasler fifty five sequence pto shaft Development how to remove pto shaft from bush hog by collection 5 pto shaft with slip clutch Technologies bush hog generate shaft cover & nissan frontier 1 piece driveshaft Credit rating”, The organization will constantly enhance solution performance to meet up with the growing buyer requirements in the rigorous type of function. We warmly welcome the pals from all the planet! This hefty-obligation BW-1000XL brush chipper with its all-stell engine enclosure is developed to maintain up for the long haul. Capable to Chip via material up to 12” (thirty.5cm), the want to rim content is diminished , generating the BW-1000XL an ideal machine for line-clearing contractors, rental yards and municipalities.
Increased with the present day day operator in mind, the BW-1000XL is obtainable with a Tier 3 Cummins QSF 2.8L 74HP (55kW), when transpoting the equipment, count on clean towing thanks to the rubber -torsion suspension.
It is easy to see w EPT the BW-1000XL is the brush chipper that operators flip to.
one: Operator safety. Crisis stop buttom is developed on side.
2: A clutchless PTO system enables the cutter to be engaged without utilizing a traditional slip clutch or idler pulley and without s EPT the motor. The program is basic to keep – once underneath the defend, belt modifications are effortlessly
accomplished with out the use of tools.
three: The Feed program will help improve operator efficiency while minimizing strain on crucial motor areas. The feed-sensing control system displays engine rpm and immediately stops and reverses the feed roller when feeding larger, hardwood substance.
four: A huge rectangular 12″ x 17″ (30.5 cm x forty three.2 cm) feed opening helps enhance efficiency by decreasing the need to trim content before feeding it into the chipper.
5: The 2-yr/2000-hour prolonged constrained warranty on drum housing, cutter drum, shaft and ring-fetter hubs offers you peace of head.
Technological knowledge for BW-1000XL:
| General Proportions and Weights | |
| Length – Feed Table Up, Tongue In | 4500 mm |
| Size – Table Down, Tongue Prolonged | 5400 mm |
| Width | 1750 mm |
| Top | 2560 mm |
| Bodyweight – Motor | 2750 kg |
| Seem Electrical power | 119 (db) |
| Engine | |
| Make and Product | Cummins QSF 2.8L Tier three |
| Amount of Cylinders | four |
| Gross Horsepower (Highest) | 74HP (55 Kw) /2400rpm |
| Torque (Max) | 371 Nm |
| Gasoline Tank Capacity | sixty five L |
| Max Gas Usage | 233g /Kw.h |
| Fuel Sort | Diesel |
| Air Cleaner | 2-stage dry with security factor |
| Oil Filter | Spin-on |
| Recommended Oil | 15W40 |
| Oil Volume with Filter | 8.4 L |
| Great EPT Capacity (Motor and Radiator) | 13 L |
| Cooling Medium | Liquid |
| Supporter | 419mm |
| Clutch Type | Clutchless PTO |
| Clutch Drive Engagement | Belt tensioner |
| Feed Technique | |
| Feed Roller Orientation | Horizontal |
| Number of Feed Rollers | 1 |
| Feed Roller Clamp Load | 158.8 kg |
| Feed Roller Minimal Length to Drum | 25mm |
| Feed Roller Dimension | 508mm x 432mm |
| Amount of Knives | 2 |
| Weight of Feed Roller | 181.4 kg |
| Variety of Feed Roller Motors | one |
| Motor Displacement | 28.3 |
| Motor Company | White |
| Feed Velocity | a hundred and five ft/min |
| Infeed Desk Width | 1321mm |
| Infeed Hopper Top | 1330mm H x 750mm W |
| Infeed Throat Ability | 630mm H x 432mm W |
| Pinch Point – Distance to Finish of Feed Table | 1689mm |
| Length from Feed Desk to Ground | 820mm |
| Safety Technique | |
| Feeding cease method | Unexpected emergency end buttom on Side of Infeed Hopper |
| Reset Strategy | Keep-to-operate Crisis stop buttom button |
| A few Position Feed Handle Bar | StHangZhourd |
| Positions | three: ahead, End and reverse |
| Drum/Disc Reducing Technique | |
| Substance Capacity | 305mm |
| Diameter | 50mm |
| Pace | 2240 rpm |
| Protection Lock – Quantity of Positions | 2 |
| Variety of Knives | 2 items |
| Number of Bedknife | four |
| Cutter Drive Factors | |
| Number of Bearings | 2 |
| Bore | 61mm |
| Type | Spherical rollers |
| Company | Linkbelt |
| Dynamic Capability | 14242.8 kg |
| Static Potential | 24267.2 kg |
| Belt Loafer/Tensioner | Of course |
| Belt Sort | 5V |
| Discharge Method | |
| Chute Peak | 2565mm |
| Chute Rotation Angle | 270 deg |
| Rotation Sort | Chain-drivve guide crank with pin lock |
| Rotational Lock | Indeed |
| Hydraulic Technique | |
| Tank potential | 26.5 L |
| Advised Oil Variety | #68 Antiwear hydraulic oil |
| Technique Type | Open up center |
| Filtration Approach | 10 micron return 100 micron suction |
| Pump Circulation at Highest RPM | eleven.4 L/min |
| Technique relief force | 17.24 Mpa |
| Stream Management | Indeed-Guide |
| Directional Management | Of course-Guide |
| Oil Cooler | No |
| Electrical Method | |
| Program Voltage | 12 volt |
| Battery | ninety/660 (Ah/A) Germany Walter Model |
| StHangZhourd Gauges | Gas, hour |
| Switches | Droop, rocker |
| Controller | BODE |
| Screen | Tach, gas, voltage, drinking water temp, oil stress,oil temp, loading, motor erro information |
| Shutdown Program | Vehicle Substantial temp, minimal stress security |
| Chassis | |
| Tongue Extension | Extendable 610mm New Electronic mail [email protected] 305mm increments |
| Hitch Variety | Pintle |
| Fender Description | Bolt-on steel |
| Axle/Suspension | Torsion |
| Type – Selection One particular | Rubber torsional |
| Brake Sort | StHangZhourd Electrical or optional hydraulic |
| Trailer Light-weight Variety | LED |
| General Proportions and Weights | |
| Size – Feed Desk Up, Tongue In | 4500 mm |
| Length – Desk Down, Tongue Extended | 5400 mm |
| Width | 1750 mm |
| Height | 2560 mm |
| Bodyweight – Engine | 2750 kg |
| Seem Electricity | 119 (db) |
| Engine | |
| Make and Model | Cummins QSF 2.8L Tier 3 |
| Quantity of Cylinders | four |
| Gross Horsepower (Highest) | 74HP (55 Kw) /2400rpm |
| Torque (Max) | 371 Nm |
| Fuel Tank Capability | 65 L |
| Max Gasoline Use | 233g /Kw.h |
| Gas Kind | Diesel |
| Air Cleaner | two-phase dry with safety component |
| Oil Filter | Spin-on |
| Recommended Oil | 15W40 |
| Oil Volume with Filter | 8.4 L |
| Amazing EPT Capability (Motor and Radiator) | thirteen L |
| Cooling Medium | Liquid |
| Admirer | 419mm |
| Clutch Type | Clutchless PTO |
| Clutch Push Engagement | Belt tensioner |
| Feed Program | |
| Feed Roller Orientation | Horizontal |
| Number of Feed Rollers | one |
| Feed Roller Clamp Load | 158.8 kg |
| Feed Roller Least Length to Drum | 25mm |
| Feed Roller Dimension | 508mm x 432mm |
| Amount of Knives | two |
| Excess weight of Feed Roller | 181.4 kg |
| Amount of Feed Roller Motors | 1 |
| Motor Displacement | 28.three |
| Motor Maker | White |
| Feed Pace | 105 ft/min |
| Infeed Desk Width | 1321mm |
| Infeed Hopper Top | 1330mm H x 750mm W |
| Infeed Throat Capability | 630mm H x 432mm W |
| Pinch Point – Distance to Conclude of Feed Desk | 1689mm |
| Distance from Feed Desk to Ground | 820mm |
| Safety Method | |
| Feeding stop program | Emergency stop buttom on Facet of Infeed Hopper |
| Reset Method | Keep-to-operate Emergency stop buttom button |
| A few Position Feed Handle Bar | StHangZhourd |
| Positions | three: forward, Cease and reverse |
| Drum/Disc Slicing Program | |
| Substance Capacity | 305mm |
| Diameter | 50mm |
| Speed | 2240 rpm |
| Safety Lock – Quantity of Positions | two |
| Quantity of Knives | two items |
| Quantity of Bedknife | four |
| Cutter Drive Components | |
| Variety of Bearings | two |
| Bore | 61mm |
| Variety | Spherical rollers |
| Maker | Linkbelt |
| Dynamic Capacity | 14242.8 kg |
| Static Capability | 24267.2 kg |
| Belt Loafer/Tensioner | Of course |
| Belt Type | 5V |
| Discharge Program | |
| Chute Peak | 2565mm |
| Chute Rotation Angle | 270 deg |
| Rotation Kind | Chain-drivve guide crank with pin lock |
| Rotational Lock | Yes |
| Hydraulic Technique | |
| Tank ability | 26.5 L |
| Advised Oil Kind | #68 Antiwear hydraulic oil |
| Program Variety | Open centre |
| Filtration Method | ten micron return one hundred micron suction |
| Pump Flow at Maximum RPM | 11.4 L/min |
| Program reduction force | 17.24 Mpa |
| Movement Control | Sure-Guide |
| Directional Management | Of course-Manual |
| Oil Cooler | No |
| Electrical Technique | |
| Program Voltage | twelve volt |
| Battery | ninety/660 (Ah/A) Germany Walter Manufacturer |
| StHangZhourd Gauges | Gasoline, hour |
| Switches | Droop, rocker |
| Controller | BODE |
| Display | Tach, gas, voltage, drinking water temp, oil force,oil temp, loading, motor erro info |
| Shutdown System | Automobile Substantial temp, lower pressure security |
| Chassis | |
| Tongue Extension | Extendable 610mm New E-mail [email protected] 305mm increments |
| Hitch Sort | Pintle |
| Fender Description | Bolt-on steel |
| Axle/Suspension | Torsion |
| Kind – Alternative 1 | Rubber torsional |
| Brake Variety | StHangZhourd Electric powered or optional hydraulic |
| Trailer Light Type | LED |
